What Temp to Smoke Pork Shoulder?
225 °F / 110 °C is the standard for pork shoulder, and takes about 7h 21m for a 7 lb cut. Running at 300 °F finishes roughly 3h 42m sooner — the table below prices that trade.
Your lid thermometer is probably reading the dome, not the grate. ThermoMaven Wireless Bluetooth Thermometer →
Every pit temperature compared
| Pit temp | Cook time (7 lb) | vs 225 °F | What you get |
|---|---|---|---|
| 225 °F / 110 °C | 7h 21m | — | Best bark and smoke, longest cook |
| 250 °F / 121 °C | 5h 36m | 24% faster | The usual compromise |
| 275 °F / 135 °C | 4h 24m | 40% faster | The usual compromise |
| 300 °F / 149 °C | 3h 39m | 50% faster | Fastest, least forgiving |
Times are for a 7 lb cut and scale with weight — each size has its own guide below. The hours are computed; the quality trade-off in the last column is judgement, not arithmetic.
What you are actually trading
Lower and slower buys time. Collagen needs hours above 160 °F to turn to gelatin, and bark needs time to dry and set. A longer cook gives both more room, which is why 225 °F remains the default despite being the slowest option here.
Hotter buys your afternoon back. The time saved is real and the results can be excellent — but the margin for error shrinks. The window between probe-tender and dry gets shorter, and the outside can set long before the middle is ready.
Whatever you pick, the finish line does not move: 205 °F / 96 °C, pulled at 202 °F to allow for carryover.
⚠️ Temperature does not skip the stall
Running hotter shortens the stall but does not remove it — evaporation still cools the surface between 150 °F and 170 °F. Wrapping at 160 °F is what actually powers through it, at any pit temperature.
Recommended Tools for Perfect Results
A pit is only at the temperature you think it is if you are measuring at the grate.
ThermoMaven Wireless Bluetooth Thermometer
Leave-in probe with phone alerts. The single upgrade that ends dry brisket and grey steak.
on Amazon
Bryco Goods Pink Butcher Paper Roll
Beats foil for the Texas Crutch: pushes through the stall while keeping the bark crisp.
on Amazon
ThermoMaven Instant-Read Thermometer
Two-second readings for spot checks and for probing brisket for tenderness.
on Amazon
As an Amazon Associate we earn from qualifying purchases. Prices and availability are set by Amazon and may change.
Cook times by weight at 225 °F
Pit temperatures for other cuts
Download the printable temperature chart
Every temperature on this site on one page — beef, pork, poultry, seafood and low & slow, plus the carryover rule. Print it and tape it inside your grill lid.
One email with the chart, plus the occasional seasonal guide. Unsubscribe in one click, no spam. Prefer not to subscribe? Download it directly.
Frequently Asked Questions
What temperature should I smoke pork shoulder at?
225 °F / 110 °C is the standard, and what every guide on this site assumes. Running hotter works and saves real time — 300 °F finishes about 3 hours 42 minutes sooner on a 7 lb cut — but leaves less time for bark to form and collagen to break down.
Is 300 °F too hot?
No, and plenty of competition cooks run hot on purpose. What you lose is margin: at 300 °F the window between perfectly tender and dried out is narrower, and the bark sets before the inside is ready if you are not watching. It is the right call when you are short of time and wrong when you are short of attention.
Does the pit temperature change the internal target?
No. Done is done: 205 °F / 96 °C either way. What changes is how long it takes to get there and how much carryover you get afterwards — a hotter pit drives more residual heat into the meat, so you pull earlier.
How accurate is my smoker's dial?
Usually not very. Built-in lid thermometers commonly read 25–50 °F off the grate, and they measure the dome, not where the meat sits. Every number on this page assumes the temperature at the grate, which is the only one worth acting on.