How Long to Smoke a 6 lb Pulled Pork at 225 °F
A 6 lb pulled pork takes roughly 6h 24m at a pit temperature of 225 °F / 110 °C, plus a 1h rest. Pull it at 202 °F / 94 °C — it carries over to 205 °F while resting. Expect the stall to hit around 2h 34m in.
Hour-by-hour timeline
- 0:00On the smoker at 225 °FFat side up, thickest end towards the fire. Do not open the lid for the first 3 hours.
- 1h 17mBark starts to setSurface goes from wet to tacky. Now you can start spritzing every 45 minutes if you like.
- ≈ 2h 34mThe stall begins (150 °F–170 °F)Internal temperature flatlines, sometimes for hours. This is normal — do not raise the pit temp in a panic.
- 3h 31mWrap at 160 °FOnce the bark is dark and does not smear, wrap tightly in butcher paper or foil. Saves roughly 1h 25m.
- 5h 46mStart probing at 200 °FCheck several spots. You are feeling for zero resistance, not chasing a number.
- 6h 24mDone at 205 °F / 96 °CProbe slides in like warm butter.
- + 1hRest before slicingHold above 140 °F in a dry cooler with towels. This step is not optional — slicing early dumps the juices onto the board.
⚠️ The Stall & the Texas Crutch
Somewhere around 150 °F–170 °F the internal temperature stops climbing, sometimes for 2–6 hours. Nothing is broken: moisture evaporating from the surface cools the meat exactly as fast as the pit heats it. It is a meat swamp cooler.
On this 6 lb cook, expect it about 2h 34m in.
When to wrap
At 160 °F, once the bark is dark and does not smear when you touch it. Wrapping stops the evaporation and powers straight through the stall — roughly 1h 25m saved here.
- 🧻 Pink butcher paper — breathes a little, keeps the bark crisp. Best for brisket.
- 🥡 Aluminium foil — fastest, but steams the bark soft. Fine for pulled pork, which gets shredded anyway.
- 🚫 No wrap — best bark, longest cook. Budget 2–3 extra hours and do not panic.
Then keep going to 205 °F / 96 °C, probing from 200 °F. When the probe slides in with no resistance it is done, even if the number disagrees.
Every method compared
Same 6 lb pulled pork, same target — only the heat changes. The most forgiving low & slow cut there is. Plenty of intramuscular fat means a wide window where it pulls perfectly.
| Method | Pit temp | Cook time | Pull at | Rest |
|---|---|---|---|---|
| Smoker (Low & Slow) | 225 °F / 110 °C | 6h 24m | 202 °F | 1h |
Pull temps differ per method on purpose: a 450 °F grill drives far more residual heat into the meat than a 225 °F pit, so the same final temperature needs a different pull point.
Adjust these numbers for your exact cut →Free interactive calculator · works offline · installs to your home screenRecommended Tools for Perfect Results
You cannot cook to temperature without measuring temperature. These are the two tools that change results the most.
Wireless Bluetooth Meat Thermometer
Leave-in probe with phone alerts. The single upgrade that ends dry brisket and grey steak.
on Amazon
Pink Butcher Paper (Unwaxed, 18")
Beats foil for the Texas Crutch: pushes through the stall while keeping the bark crisp.
on Amazon
Instant-Read Digital Thermometer
Two-second readings for spot checks and for probing brisket for tenderness.
on Amazon
As an Amazon Associate we earn from qualifying purchases. Prices and availability are set by Amazon and may change.
Other sizes
Download the printable temperature chart
Every temperature on this site on one page — beef, pork, poultry, seafood and low & slow, plus the carryover rule. Print it and tape it inside your grill lid.
One email with the chart, plus the occasional seasonal guide. Unsubscribe in one click, no spam. Prefer not to subscribe? Download it directly.
Frequently Asked Questions
How long does a 6 lb pulled pork take at 225 °F?
About 6 hours 24 minutes of cook time, plus 1 hour of rest. That works out to roughly 1.1 hours per pound. Always budget 2–3 extra hours: the stall is unpredictable and a cook that finishes early can be held wrapped in a cooler.
What internal temperature is a pulled pork done at?
205 °F / 96 °C, but temperature is only a guide. Start probing at 200 °F and pull when the probe slides in with no resistance.
Should I wrap in foil or butcher paper?
Butcher paper for brisket — it breathes just enough to keep the bark crisp. Foil is faster but steams the bark soft, which matters less for pulled pork since it gets shredded. Either way, wrap at about 160 °F once the bark is set.
Why did my temperature stop rising?
That is the stall, between 150 °F and 170 °F. Evaporation from the surface is cooling the meat as fast as the pit heats it. Wrap it or wait it out — do not crank the pit temperature.